I always considered mica caps appropriate for HF! Still use WW-II Dublier
ones.
DL2NBU was lucky with some old porcelain caps. I know isolation materials
improved lately.
73 de Mario, S56A
----- Original Message -----
From: "W0UN -- John Brosnahan" <shr@swtexas.net>
To: "Mario, S56A" <s56a@bit.si>; <cq-contest@contesting.com>
Sent: 13. junij 2006 14:17
Subject: Re: [CQ-Contest] Filters
> At 01:21 AM 6/13/2006, Mario, S56A wrote:
>>W0UN: And at no time did any capacitors fail the 200 watt test -- or even
>>get very warm.
>>
>>I guess you were lucky! I made W3NQN filters with a big VU mica caps for
>>2 kV and they all failed on 7 MHz and above.
>>Manufacturer sent us new batch for free but they are not tested yet.
>>DL2NBU specifies VAR power ratings required.
>
>
> Mario,
>
> With all due respect I think it had nothing to do with luck. Ed designed
> the filters
> specially using the referenced capacitors BECAUSE they would handle the
> power. Ed was VERY insistent that these were the right capacitors to use.
> You
> make substitutions at your own risk.
>
> --John W0UN
>
>
>
>
>>Simple ICE filter configuration should survive most abuses but 21/28 MHz
>>isolation is not good enough for SO2R.
>>
>>Please note that BPF info is available in ON4UN book on low bands.
>>
>>73 de Mario, S56A
>>
>>
>>
>>_______________________________________________
>>CQ-Contest mailing list
>>CQ-Contest@contesting.com
>>http://lists.contesting.com/mailman/listinfo/cq-contest
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
|