You can certainly test Bird slugs, and they can be calibrated also.
However the slug makes no direct contact with the thruline section, so if the
slug detector was open, shorted or defective it wouldn't cause any problems in
operation other than the meter won't indicate (or indicate properly). The
only thing that could interfere with actual operation of the line is a bad
coaxial connection at one of the thruline section connectors, such as the
prongs in the center contact have separated too widely and now the connector
isn't making contact.
I suspect if you remove the Bird coupler from the line entirely, you'd still be
seeing the same problem.
-----Original Message-----
From: Amps [mailto:amps-bounces@contesting.com] On Behalf Of DGB
Sent: Thursday, July 17, 2014 1:30 PM
To: amps@contesting.com
Subject: [Amps] Bird Slugs
Is it possible for bird slugs to go bad? It's a 2500H and the most power
that's ever hit it was 1800w. I have the line coupler installed on my alpha's
output and all of a sudden getting big-time reflected power indications on the
91b thus shutting it down. Don't have another to substitute so is there a way
to test them?
thanks 73 Dwight NS9I
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|