------------ ORIGINAL MESSAGE ------------(may be snipped)
On Fri, 8 Dec 2017 15:49:18 -0500, the original poster wrote:
>but I can't budge the
>setscrews holding the old one. Allen wrenches twist to no effect.
REPLY:
Allen head set screws sometimes develop a crack from the torque of the
wrench. If so, they are all but impossible to get out except by
drilling. I hope that is not the case for you. Have a close look with
a magnifier and see if you can see a crack.
Good luck.
73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|