Best lock washer in this application is the one with big teeth on the outside
rim of the washer.... Second choice is big teeth on the inside of the hole.
The compression split lock washers are not usually turned upon tightening and
thus cut very little into the underlying metal.
GL Chas
Charles Harpole k4vud@hotmail.com
> From: n4zed@comcast.net
> To: amps@contesting.com
> Date: Mon, 17 Oct 2011 20:41:35 -0400
> Subject: Re: [Amps] Anodised aluminum
>
> Yes you can. I would use star or lock washers and NOT remove any anodize if
> at all possible.
>
> Ken
> N4zed
>
> ----- Original Message -----
> From: "Robert Briggs" <vk3zl@bigpond.com>
> To: <amps@contesting.com>
> Sent: Monday, October 17, 2011 6:53 AM
> Subject: [Amps] Anodised aluminum
>
>
> >
> >
> > Hi all...I have just aquired a quantity of 2mm anodised aluminum sheet,,
> > I am wondering if I remove the anodising from all contact surfaces if I
> > can use this stock for rf deck cases...
> >
> > Cheers all....Bob..VK3ZL..
> > _______________________________________________
> > Amps mailing list
> > Amps@contesting.com
> > http://lists.contesting.com/mailman/listinfo/amps
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|