Amps
[Top] [All Lists]

Re: [Amps] ALS-1306 and others

To: Kevin Stover <kevin.stover@mediacombb.net>, "dave@nk7z.net" <dave@nk7z.net>
Subject: Re: [Amps] ALS-1306 and others
From: Charles Henry <k4vud@hotmail.com>
Date: Fri, 1 May 2015 00:26:30 +0000
List-post: <amps@contesting.com">mailto:amps@contesting.com>
A cheaper way to get into the K3 bandwagon is the KX-3 at $1000 and the SPE 
Expert 1K-FA ATU at about $2700. which gives more RF than the Elecraft 500 watt 
unit at $3000 with ATU.
 
Another thought is to use the SPE 1.5K-FA ATU with stupendous gain (defeated in 
USA versions, so get international version) at about $4500 and have over a KW 
from the KX3 as a driver.   This pairing seems the unsung secret combo for KX-3 
lovers, and both units are about as small as can be.
 
Get two 1.3K and the SPE CO-1 HF and your KX-3 station puts out over 5KW.   
Wouldn't it be interesting to have the little KX-3 in your hand with so much RF 
going out to the antenna.
 
Wonderful world, 73, Charly
 
> Date: Thu, 30 Apr 2015 18:08:51 -0500
> From: kevin.stover@mediacombb.net
> To: dave@nk7z.net
> CC: amps@contesting.com
> Subject: Re: [Amps] ALS-1306
> 
> I think you masde a good decision.
> 
> Don't get me wrong...I love my Elecraft "stuff" but think when it comes down 
> to it the KPA500 should have been the KPA1K. That's where the solid state 
> competition is now. 
> 
> Some guys are still upset that they had both 800 and 1.5K protypes at Dayton 
> and didn't build either one.
> 
> Sooner or later the vacuum tubes will become so expensive or scarce that 
> manufacturers will switch from tubes to solid state. Ameritron uses the tried 
> and true MRF150. W6PQL has built one with an NXP LDMOS device. A pair of 
> those with appropriate level of negative feedback for stabilty, running at 
> 750W each would be a world beater. A pair of LDMOS devices cost less than a 
> Chinese 8877.
> 
> 
> 
> On Thu, 30 Apr 2015 05:11:13 -0700
> David Cole <dave@nk7z.net> wrote:
> 
> > Hi,
> > 
> > Bought an ALS-1306 to replace the AL-82.  Finally decided to go the way
> > of no tune...  
> > 
> > Did some looking, and some thinking about use, etc., and came to the
> > conclusion that the ALS-1306 will do what I need.
> > 
> > Any quirks of the amp I should be aware of that anyone knows of?
> > -- 
> > Thanks and 73's,
> 
> -- 
> R. Kevin Stover
> AC0H
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
                                          
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>