And there is one on EBay for 8 bucks. Item 370139624703
73
Jim W7RY
----- Original Message -----
From: "Jim W7RY" <w7ry@arrl.net>
To: "K6QD" <k6qd@cox.net>; <amps@contesting.com>
Cc: <ham_amplifiers@yahoogroups.com>
Sent: Wednesday, January 07, 2009 8:43 PM
Subject: Re: [Amps] Balast Resistor used in Henry PA's
> It's called a cone heater.
>
> http://www.process-heating.com/CDA/Archives/580bd902cd4fd010VgnVCM100000f932a8c0____
>
> 73
> Jim W7RY
>
> ----- Original Message -----
> From: "K6QD" <k6qd@cox.net>
> To: <amps@contesting.com>
> Cc: <ham_amplifiers@yahoogroups.com>
> Sent: Wednesday, January 07, 2009 10:25 AM
> Subject: [Amps] Balast Resistor used in Henry PA's
>
>
>>I am looking for one (or two) ballast resistors (heating element), approx.
>> 30Ω cold, that are used in various Henry amps., specifically the 4K-U.
>> They
>> are made from helically wound Nichrome wire on a ceramic form. The
>> resistor
>> has a screw-in, light bulb type base. Any help would be appreciated.
>>
>> Tks es 73 de Mike K6QD
>>
>>
>>
>>
>>
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|