Re: [Amps] Relay rewinding

["jeryb77" <jeryb77@hotmail.com>]

Sam,
Here is an article that should help you

http://www.w1ghz.cx/10g/relay.htm

hth
Jerry

----- Original Message ----- 
From: "Svante Nordenstrom" <sm3dyu@ji-net.com>
To: <Amps@contesting.com>
Sent: Friday, January 14, 2005 3:47 AM
Subject: [Amps] Relay rewinding


> Hi all
> I have a number of brand new coax relays, brand Bernier type 
> LMT/B/1023526/2
> with N-type connectors. They are NO configured and makes when power, which
> somewhere between 60 to 110V DC, is applied. The coil has a DC resistance 
> of
> 4.5 kohm with the dimensions 50 x 25 mm outer measurements of bobbin 
> (Sorry,
> I'm metric). Can anybody give a rough figure of what size wire and number 
> of
> turns to make it a 12VDC relay? I don't have any relevant books for this
> kind of calculations and I am probably  too rusty in the math anyway..
> 73's
> Sam  HS0ZDY
>
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps