Re: [Amps] placement of RF choke bypass cap.

To:	<amps@contesting.com>
Subject:	Re: [Amps] placement of RF choke bypass cap.
From:	"Ken" <n4zed@comcast.net>
Date:	Sat, 20 Mar 2010 06:00:01 -0400
List-post:	<amps@contesting.com">mailto:amps@contesting.com>

>> 1.) Start with a #10 or #12 self supporting copper wire dipole that is 
>> about 10" each side of the center (Fres ~ 280MHz)
>> 2.) I will solder a 2" dia. thin copper disk to each element at the 1/3 
>> point out from the center on each side and remeasure Fres.
>> 3.) Then I will move the disks to the 2/3 point from the center and 
>> remeasure Fres.

>Snip<

I'm looking forward to seeing the results of this one !!!
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread]	Current Thread	[Next in Thread>
Re: [Amps] placement of RF choke bypass cap., (continued) Re: [Amps] placement of RF choke bypass cap., Gary Schafer Re: [Amps] placement of RF choke bypass cap., Bill, W6WRT Re: [Amps] placement of RF choke bypass cap., Bill, W6WRT Re: [Amps] placement of RF choke bypass cap., Gary Schafer Re: [Amps] placement of RF choke bypass cap., Bill, W6WRT Re: [Amps] placement of RF choke bypass cap., Larry Benko Re: [Amps] placement of RF choke bypass cap., Bill, W6WRT Re: [Amps] placement of RF choke bypass cap., Roger Re: [Amps] placement of RF choke bypass cap., Bill, W6WRT Re: [Amps] placement of RF choke bypass cap., Roger Re: [Amps] placement of RF choke bypass cap., Ken <= Re: [Amps] placement of RF choke bypass cap., Bill, W6WRT Re: [Amps] placement of RF choke bypass cap., pc5m, Carel Re: [Amps] placement of RF choke bypass cap., Bill, W6WRT Re: [Amps] placement of RF choke bypass cap., pc5m, Carel Re: [Amps] placement of RF choke bypass cap., pc5m, Carel Re: [Amps] placement of RF choke bypass cap., Bill, W6WRT Re: [Amps] placement of RF choke bypass cap., pc5m, Carel Re: [Amps] placement of RF choke bypass cap., Gary Schafer Re: [Amps] placement of RF choke bypass cap., Frank T Brady Re: [Amps] placement of RF choke bypass cap., Larry Benko

Previous by Date:	Re: [Amps] placement of RF choke bypass cap., Roger
Next by Date:	Re: [Amps] placement of RF choke bypass cap., Bill, W6WRT
Previous by Thread:	Re: [Amps] placement of RF choke bypass cap., Roger
Next by Thread:	Re: [Amps] placement of RF choke bypass cap., Bill, W6WRT
Indexes:	[Date] [Thread] [Top] [All Lists]