Amps
[Top] [All Lists]

Re: [Amps] plate voltage meter shunt

To: AMPS <amps@contesting.com>
Subject: Re: [Amps] plate voltage meter shunt
From: Chris Wilson <chris@chriswilson.tv>
Reply-to: Chris Wilson <chris@chriswilson.tv>
Date: Sat, 3 Nov 2012 23:10:38 +0000
List-post: <amps@contesting.com">mailto:amps@contesting.com>

> I am installing a meter to measure plate voltage 1-5000v@ 1a dc,
> the meter has a 1ma fs rating.  the serial resistance I have made up
> in the past has been 3 watt metal film resistors in series. since
> they can only rated for 200v per resistor it takes many to do the
> job. Can some other resistor type with a higher rating be used in a
> safe manner for this purpose?...tnx, Doug,w9iix
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps


03/11/2012 23:09

I have used these high voltage resistors for various applications with
good success, fast delivery and good communications : 
http://www.ebay.co.uk/itm/180976136870?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

-- 
       Best Regards,
                   Chris Wilson.

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>