[AMPS] Linear AMP timing

Amps

[AMPS] Linear AMP timing

To:	<amps@contesting.com>
Subject:	[AMPS] Linear AMP timing
From:	Peter.Chadwick@zarlink.com (Peter Chadwick)
Date:	Tue, 7 Aug 2001 08:12:43 +0100

>On a Linear Amplifier would having the output relay of the amplifier
> operate 20 millisecs before the input relay be sufficient to keep RF
> from being on the output contacts before they are closed?

This depends a bit on the form of the relay. If the relay at the output is a
changeover type, then you still can get the hot switching problem, albeit
only(!) with the drive power. It is all very dependent on the exact switching
system and the timings.


73

Peter G3RZP


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[AMPS] Linear AMP timing, Denis Coolican [AMPS] Linear AMP timing, Tom Rauch [AMPS] Linear AMP timing, Bill Turner [AMPS] Linear AMP timing, Pete Smith [AMPS] Linear AMP timing, Bill Turner [AMPS] Linear AMP timing, Paul Hewitt [AMPS] Linear AMP timing, Bill Turner [AMPS] Linear AMP timing, Paul Hewitt [AMPS] Linear AMP timing, Bill Turner [AMPS] Linear AMP timing, Chris Pedder [AMPS] Linear AMP timing, Peter Chadwick <= [AMPS] Linear AMP timing, Tom Rauch [AMPS] Linear AMP timing, 2 [AMPS] Linear AMP timing, kl7ra [AMPS] Linear AMP timing, 2 [AMPS] Linear AMP timing, 2 [AMPS] Linear AMP timing, Bill Turner [AMPS] Linear AMP timing, Tom Rauch FW: [AMPS] Linear AMP timing, Paul Hewitt [AMPS] Linear AMP timing, 2 [AMPS] Linear AMP timing, 2

Previous by Date:	[AMPS] Linear AMP timing, Tom Rauch
Next by Date:	[AMPS] Watercooling Question, Johan Nordin
Previous by Thread:	[AMPS] Linear AMP timing, Chris Pedder
Next by Thread:	[AMPS] Linear AMP timing, Tom Rauch
Indexes:	[Date] [Thread] [Top] [All Lists]