From: "Carl" <km1h@jeremy.qozzy.com>
To: "Paul Christensen" <w9ac@arrl.net>, <amps@contesting.com>
Subject: Re: [Amps] Amps Digest, Vol 195, Issue 10--Replacing padder
caps on an Alpha 77DX/SX
<And also 2 holer AL-1500's which was as simple as using the AL-82 tube
<chassis and a filament transformer. W8JI pioneered that swap for his own use.
<Never had a report of any failures.
<Carl
## Very slick ! Is the oem PI net retained ? The resulting plate load Z
with
a pair of 8877s would only be one half of a single tube. The 2 holer would
require
double the tune and load C..and one half the UH on each band.
## Was an out board B+ supply used ?
Jim VE7RF
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|