Hi Chris,
well, I'm glad that the transformer project was successful.
I believe I am being a bit thick and probably not
understanding how you intended the wires to appear off the bobbin. If
I follow your instruction verbatim, as I believe they are intended, I
would end up not being able to have full turns on the 20 turn winding,
as bringing them out on opposing sides would add(or subtract a half
turn from one of them.
Indeed you misunderstoff what I meant. What I meant was winding only
full turns, never half turns, and by "bringing out the wire on opposing
sides", the "sides" I meant are the side walls of the bobbin. So, if you
place the bobbin on the desk in front of jyou such that it can roll away
or toward you, left and right are the two sides I mean. NOT with the
bobbin lying flat on its side!
It's the orientation from which you look at a bobbin while winding it in
a machine.
So the two wires of a winding always come out through the same core opening.
Manfred
========================
Visit my hobby homepage!
http://ludens.cl
========================
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|