Amps
[Top] [All Lists]

Re: [Amps] SB-200 Mods

To: Jeff Blaine <KeepWalking188@ac0c.com>, <amps@contesting.com>
Subject: Re: [Amps] SB-200 Mods
From: gudguyham via Amps <amps@contesting.com>
Reply-to: gudguyham <gudguyham@aol.com>
Date: Thu, 28 Jan 2021 11:55:39 +0000 (UTC)
List-post: <mailto:amps@contesting.com>
I agree with Jeff, adding 160 is just too much work and it would be a 
compromise at the end of the day.  You’ll end up spending more money and time 
than if you got your hands on a hacked 200 for CB or just one that suffered a 
band switch blow out.  Tear it apart and build it as a mono band 160 amp 
instead.  Now that will work perfectly and put out lots of power and it WON’T 
be a compromise!  I’ve been there done that.


Sent from the all new Aol app for iOS


On Wednesday, January 27, 2021, 11:55 PM, Jeff Blaine <KeepWalking188@ac0c.com> 
wrote:

I spent a bit of time on that amp a while back.  Involved a GI7B 
conversion but warc operation was part of the goal.  I forget which warc 
band it was that the plate choke is self resonant close too, but it's 
one of them.  You would need to treat it for that.

My rationale for the project was to hone my construction, amp and design 
skills so the investment has some payback in perpetuity. The amp today 
sits on the shelf with a variety of problems, never to see RF again.

In fact, given I did spend a massive amount of time and money on that 
project, in retrospect I have many times strongly recommend guys asking 
me about the project to just track down an AL80b (single tube 3-500z 
amp) instead.  The AL80b is about 10x the amp in just most other than 
sentimental respects.  And it's relatively easy to sell an unmodified 
SB-200 as well.

73/jeff/ac0c
alpha-charlie-zero-charlie
www.ac0c.com


On 1/27/21 9:08 PM, Jim wrote:
> And this was converting it to ONLY 160 meters. Not adding 160 to it.
>
>
> If you search on SB200 160 meters, you will find many examples.
>
>
> Thanks
> 73
> Jim W7RY
>
> On 1/27/2021 7:31 PM, Jim wrote:
>> There was an article in one of the 60-70s arrl handbooks about a 160 
>> meter conversion to an SB200.
>>
>>
>> Thanks
>> 73
>> Jim W7RY
>> On 1/27/2021 3:56 PM, Jim Koshmider via Amps wrote:
>>> Has anyone in the group modified an SB-200 for 160 meters, or for 
>>> the WARC bands?  Any info would be appreciated.
>>> Thanks.
>>> 73,
>>> Jim,  K8OZ
>>>
>>> _______________________________________________
>>> Amps mailing list
>>> Amps@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/amps
>>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps



_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
<Prev in Thread] Current Thread [Next in Thread>