On Feb 20, 2005, at 5:51 AM, TexasRF@aol.com wrote:
>
> Hi Rich, here we go with the fly excrement in the pepper again!
> ?
> .The discussion was about in circuit adjusting a network with an rf
> analyzer/bridge. No mention of L networks, etc. When you connect a
> resistive load of the correct value to the input and an rf analyzer to
> the output of an L network or? Pi network , you can adjust for 50 +j0
> at the analyzer. As you know, j0 means no series (or parallel for that
> matter) reactance is present. Also as you now, that is what we
> commonly consider "resonant".
> ?
> Your point about the L and Pi networks not being resonant is mute.
You said a Pi-network's Tune-C adjusts resonance.
> ... ... ...
Richard L. Measures, AG6K, 805.386.3734. www.somis.org
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|