Amps
[Top] [All Lists]

[Amps] Dayton Trade: My 1200w HF Amp for Your 600w HF Amp

To: "amps@contesting.com" <amps@contesting.com>
Subject: [Amps] Dayton Trade: My 1200w HF Amp for Your 600w HF Amp
From: "qrv@kd4e.com" <qrv@kd4e.com>
Reply-to: qrv@kd4e.com
Date: Thu, 08 May 2014 22:56:58 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
WANTED
---------------------------------------------------------------

Solid State 160-10m 600w Output amp w/HF filters.
(e.g. Ameritron ALS-600, preferably w/analog vs switching PS).

TRADE
--------------------------------------------------------------
DENTRON Clipperton L 160-10m Legal Power Amp

Four as-new 572B's. 1200W out with 100W input on 240VAC.

(Complete but needs included original HF coil, etc. re-installed
- prior owner tried 6m conversion, restored to 10m then stopped.
Will include extra doorknobs to improve 160/80m pwr.)

PLUS, one of the following:

1. ZeroFive 6-80m 29' Stealth/Portable Vertical

http://www.zerofive-antennas.com/29-foot-broadband-6-80-meter-stealth-hoa-multiband-vertical-antenna

OR ...

2. Remote/Mobile HF AutoTuner

1.6MHz - 30MHz
(tuning a vertical or wire at least 39 feet)
3.5MHz - 30MHz
(tuning a vertical or wire at least 10 feet)
Input power (max): 200 watts P.E.P.
Model: Alinco EDR-2

NOTE: We can meet-up at Dayton -- Space # FW 2337.

David KD4E


--

David (NOT Dave) Colburn, KD4E - Nevils, Georgia USA

Safe & Secure Search Engine: duckduckgo.com

Android for Hams: groups.yahoo.com/group/hamdroid
Creative Tech: groups.yahoo.com/group/ham-macguyver
Raspi Alternative: groups.yahoo.com/group/beagleboneblack/

Restored to design-spec at Heaven's gate 1Cor15:22
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>
  • [Amps] Dayton Trade: My 1200w HF Amp for Your 600w HF Amp, qrv@kd4e.com <=