| One thought on the ALS-600...  I've known Martin Jue for a long time, as 
he and I worked at the same defense industry plant in 1967 - 1968 time 
frame (Magnavox Government and Industrial Division).  He and I talk 
regularly, and we were discussing the ALS-600 a few months ago, and 
Martin recommended the ALS-600S - the version with the switching power 
supply.  Two reasons why: 1).  Many of the MRF150 failures are due to 
the voltage sag in the linear supply, and 2). The switcher is quite 
clean with few spurs.  And, especially for traveling, the switching 
supply is much lighter than the linear supply! 
73
Don W9CW
On 4/13/2014 6:59 PM, Roger wrote:
 
On 4/10/2014 8:22 PM, Bill Turner wrote:
 
ORIGINAL MESSAGE:          (may be snipped)
On 4/10/2014 2:06 PM, Kevin Stover wrote:
 
Unlike some tube amps solid state amps don't suffer fools lightly
 
REPLY:
Certainly true, and the "fools" label applies to both designers and 
users. 
 
Do the 600s work well?  If so, there is nothing wrong with using a 
pair of them with dividers and combiners. It's a very good way to 
double the power.  Put 4 together and run them conservatively.  It 
might improve the IM.  OTOH that's a lot of current out of a PS. 
Most higher powered SS amps are 2 or 4 individual PP amps/sections 
tied together with combiners.  It works well with 2-meter amps There 
used to be one that had 4 sections and ran 600 watts. I had one for a 
while. The original owner talked me into selling it back to him.  At 
times I wish I'd kept it. 
You can do the same with 2-meter amps. Just disable the keying in one 
and let the remaining one key both.  You do have to keep the phasing 
such that the signal from one doesn't get back into the input of the 
other and you end up with a high powered flip flop and the amps have 
to be identical for the simplest setup. 
73
Roger (K8RI)
 
73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
 
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
 
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
 |