Works for me
Paul K0UYA
----- Original Message -----
From: "Glen Zook" <gzook@yahoo.com>
To: <amps@contesting.com>; "Paul Kraemer" <elespe@lisco.com>
Sent: Tuesday, April 05, 2011 9:44 PM
Subject: Re: [Amps] Transformer i.d.
Being that I am a firm believer in the principles of the conservation of my
finances and labor (you can say "cheap and lazy") I am trying to keep from
bringing the transformer to my work bench. I can still lift 70 pounds but I
definitely don't like to if I can avoid it. If necessary, I'll just use a
filament transformer (like 6.3 VAC or 12.6 VAC) and bring it to the
transformer.
Glen, K9STH
Website: http://k9sth.com
--- On Tue, 4/5/11, Paul Kraemer <elespe@lisco.com> wrote:
> From: Paul Kraemer <elespe@lisco.com>
> Subject: Re: [Amps] Transformer i.d.
> To: "Glen Zook" <gzook@yahoo.com>, amps@contesting.com
> Date: Tuesday, April 5, 2011, 9:36 PM
> Glen
> Were me, I'd just apply very low voltage from the variac to
> two of the primary connections and measure away
> Paul K0UYA
> ----- Original Message ----- From: "Glen Zook" <gzook@yahoo.com>
> To: <amps@contesting.com>
> Sent: Tuesday, April 05, 2011 7:14 PM
> Subject: [Amps] Transformer i.d.
>
>
> > I now have a transformer that is reportedly rated at
> 3000 volts at 1 amp.
> >
> > The transformer is supposedly from either a Henry or
> Alpha amplifier. It weighs about 70 pounds. The
> nomenclature is as follows:
> >
> > Elect Corp of America
> > South Gate
> > p/n ECA 1028
> >
> > Unfortunately, there is no other information on the
> transformer such as which terminal is which tap on the
> secondary. The primary terminals are obvious, they are
> completely different from the terminals on the
> secondary. The primary terminals are numbered 6, 7,
> and 8. These are very large solder terminals.
> >
> > The secondary terminals are numbered 1, 2, 3, 4, and
> 5. These are machine screw studs mounted on an
> insulating material. What I really need to know is how
> these 5 terminals are configured. I sincerely don't
> want to have to apply voltage and then measure the voltage.
> >
> > Anyone have some information on this particular
> transformer?
> >
> > Glen, K9STH
> >
> > Website: http://k9sth.com
> > _______________________________________________
> > Amps mailing list
> > Amps@contesting.com
> > http://lists.contesting.com/mailman/listinfo/amps
>
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|