If I remember correctly, you have to remove both covers. You need to access the screws
that hold it in from the top and take it out from the bottom. I suggest cutting the wires
going to it first and labeling them, so you can more easily rewire it.
On 9/24/2012 12:12 PM, Behiels JeanPierre wrote:
Hi;
Could anyone explain how I can remove on the easyest way the originally build-in
antenne relay of a old TL922 amplifier. I will change in this unit,to
originally one
by a vacuum type of Jennings. I could not find any information on that even not
in a
service manual of the equipment self !! All recomandations will be mutch
appreciated
concerning this subject. I think it is important to start on the good way,and
not
oppening the wrong cover to examine (above or down cover or both)
Kindly regards Jean ON4AEF. _______________________________________________ Amps
mailing list Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
--
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco/
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|