Amps
[Top] [All Lists]

Re: [Amps] Acom 2000A - typical output power?

To: amps@contesting.com
Subject: Re: [Amps] Acom 2000A - typical output power?
From: Joe <nss@mwt.net>
Date: Wed, 14 Sep 2016 22:24:24 -0500
List-post: <amps@contesting.com">mailto:amps@contesting.com>
where are the details of thos umm "Overseas" amp?

Joe WB9SBD
Sig
The Original Rolling Ball Clock
Idle Tyme
Idle-Tyme.com
http://www.idle-tyme.com
On 9/14/2016 6:04 PM, Kevin wrote:
There are two versions like they did with the 2500A. One "FCC Approved", and limited to 15dB gain, and the other not. Array Solutions doesn't sell the non-FCC Approved versions. All the OM Power amps are using the Chinese version of the 4CX1000A, the FU-728F, either singly or a pair.


On 9/11/2016 5:53 PM, Bill Turner wrote:
------------ ORIGINAL MESSAGE ------------(may be snipped)

On Sat, 10 Sep 2016 15:18:40 -0400, you wrote:

To the original poster: another option to consider is the OM POWER 2000A+ ("A" for auto-tune). If purchasing new, it's less than the ACOM 2000A and covers 6m. Single FU-728F tetrode, Auto-tune 2KW+ on CW/SSB, 1500W RTTY on 160-10, 1300W on 6m. The amp appears to be based on the manual-tune OM2000+
with the addition of a touch screen display and native Ethernet
connectivity.

Paul, W9AC
REPLY:

According to the OM website, it does not yet have FCC approval. Is
that correct?

They list the gain as 17 dB, which exceeds the FCC limit. Is that also
correct?

Array Solutions seems to be selling these, although their website is
down for maintenance right now so I can't verify.

73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps



_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>