Amps
[Top] [All Lists]

Re: [Amps] for 2KL

To: amps@contesting.com
Subject: Re: [Amps] for 2KL
From: "Joe Subich, W4TV" <lists@subich.com>
Date: Fri, 06 Aug 2010 21:43:55 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>

 > Does anyone have a reason  other than just "moving on" to something
 > different????  That is, is there something in the IC-2KL that would
 > strongly motivate a company to stop making it?????

The 2KL was only a 500 W amplifier ... Icom moved along to the 4KL
which was a 1 KW amplifier.  The 4KL had four amplifier modules vs.
two modules in the 2KL.

The 4KL was replaced by the PW-1 which uses the MRF-150 FET vs. the
2SC2652 bipolar transistor in the 2KL/4KL.  The FETs operate at 48V
vs. 13V for the bipolar transistors.  The MRF-150 is cleaner and more
efficient than the low voltage transistors.  Overall the PW-1 with its
FETs is a much better design than the 2KL/4KL.

73,

    ... Joe, W4TV


On 8/6/2010 8:14 PM, Charles Harpole wrote:
>
> I shopped for 2 KL for years and now have 3.  Those who own them will not let 
> go.  It is a very unique design in heat handling, etc. and very too bad to 
> have it withdrawn from production at any time, now so many yrs ago.
> Does anyone have a reason  other than just "moving on" to something 
> different????  That is, is there something in the IC-2KL that would strongly 
> motivate a company to stop making it?????    Tnx,  73
>
> Charles Harpole k4vud@hotmail.com
>
>
>
>> Date: Fri, 6 Aug 2010 12:25:25 -0800
>> From: w7ry@inbox.com
>> To: amps@contesting.com
>> Subject: Re: [Amps] replacement cost for 2KL
>>
>> Indeed... A suitable Icom replacement would be the PW1.
>>
>> 73
>> Jim W7RY
>>
>>
>>> -----Original Message-----
>>> From: sub1@rogerhalstead.com
>>> Sent: Fri, 06 Aug 2010 15:00:53 -0400
>>> To: amps@contesting.com
>>> Subject: Re: [Amps] replacement cost for 2KL
>>>
>>>
>>>
>>> On 8/6/2010 9:36 AM, Dave M wrote:
>>>> Hey guys , had a breakin last night and lost everything I had set up for
>>>> the contest this weekend , insurance is asking me for the rerplacement
>>>> value of a Icom 2kl amp and power supply , no items on Ebay right now ,
>>>> but I figure about 1200 on the used market , does that sound about right
>>>> ???
>>>>
>>> For replacement cost I always use the retail price for a new piece of
>>> equipment, definitely not used. OTOH that is what my insurance company
>>> told me that is what they expect as "replacement cost", but your company
>>> may be different.
>>>
>>> 73
>>>
>>> Roger (K8RI)
>>>>
>>>> ......................................................................................................
>>>> Thanks and
>>>>
>>>> 73 Dave VE3DV / VE3BNF
>>>>
>>>>
>>>> _______________________________________________
>>>> Amps mailing list
>>>> Amps@contesting.com
>>>> http://lists.contesting.com/mailman/listinfo/amps
>>>>
>>>>
>>> _______________________________________________
>>> Amps mailing list
>>> Amps@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/amps
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>                                       
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>