Ian the ISBN number and other details are below. Hope this helps!
Title: Practical Transformer Design Handbook
Author: Eric Lowden
Publisher: Howard Sams Publishing
Date: 1980
Sams No.: 21657
ISBN No.: 0-672-21657-4
Will Matney
US Amp
Message: 3
Date: Thu, 20 May 2004 07:49:47 +0100
From: "Ian White, G3SEK" <G3SEK@ifwtech.co.uk>
Subject: Re: [Amps] Re: Tuned power transformer
To: amps@contesting.com
Message-ID: <+vlz2cCLUFrAFAGR@ifwtech.co.uk>
Content-Type: text/plain;charset=us-ascii;format=flowed
Does it have an ISBN number on the rear cover or the inside title page?
ISBN is a unique ID which makes any book much easier to locate.
-- 73 from Ian G3SEK http://www.ifwtech.co.uk/g3sek
The best reference material I have found, and what I use, is a book
published by Howard Sams named "Practical Transformer Design". It deals
with every aspect of transformer, autotransformer, and choke design.
Why there is not anything published about transformer design is beyond
me but this should give you a starting point. If anyone else would
like, I can send in the basic formulas for the calculations. I would
check with the local library or electronics supply house carrying Sams
publications for the book. It was published in 1980 but is still obtainable.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|