Hi Ken,
I don't know that exact switch well but probably big enough to be
possible that you can drill out the rivet then replace the contacts with
some from an otherwise unsuitable wafer, think that's been standard
practice on a number of abused or poorly designed amps over the years.
Unless of course its the wiper that's knackered!
A good rummage through some well stocked junque boxes should yield
something suitable. I've likely got an old switch wafer here that would
work for cannibalizing but you'd have to come get it :)
Martin, HS0ZED
On 30/04/2019 08:18, Ken Claerbout wrote:
I have a pristine 425 amp which has a destroyed back wafer on the
bandswitch. It's the wafer that switches in the 400 pf doorknob cap
and segments of the tune cap.
I'll keep searching, but I wonder if anyone has a part number or knows
where I might get a replacement?
73
Ken K4ZW
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|