Ummmmmm . . . . do we all need to know? 'Snot the first time, OM.
N3HE
----- Original Message -----
From: <w2cqm@juno.com>
To: <amps@contesting.com>
Sent: Monday, August 20, 2007 9:28 PM
Subject: [Amps] (no subject)
>
>
> Hi Lou, I just missed you on IM this evening. I spent some time on the
> Drake L4B. I removed the OEM power rocker switch and sold it on QTH
> almost immediately for $65 shipped. I replaced it with a switch I had and
> completely rewired the unit with the new 110VAC plug and fuse bringing
> that voltage into the rig. Fortunately, the RF deck components are dual
> voltage so I was able to make the changeover without too much trouble.
> Works FB. On power up, all the components come on in the deck including
> the fan, neons, and the filament/ accessory voltages. Simultaneously, I
> send 110VAC down on a interconnecting power line that activates the
> remote 115VAC step start power supply controls. The remote power supply
> has its own 220VAC plug. After rewiring the bias, it shouldn't take too
> long to see if it was worthwhile. Ron
SNIP
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|