here is a place that sells replacement meters
http://www.harbach.com/harpg3.htm
Walter Fairclough wrote:
> I've been told that the plate current meter on the SB-220 can be replaced
> with a meter from a Heath HM-102 wattmeter. I've noticed that the meter
> movement on the one in the HM-102 is approx. 1/2" in diameter while the one
> from the SB-220 is larger at about 1 to 1-1/4" in diameter.
>
> I think the resistance in the SB-220 meter is approx. 1400 ohms and its FSD
> is 2ua. I don't know what the specs are on the one in the HM-102.
>
> Can anyone tell me if they are interchangeable or not? I'd hate to blow a
> good meter.
>
> Thanks
>
> Walter-VE3EN
>
> --
> FAQ on WWW: http://www.contesting.com/ampfaq.html
> Submissions: amps@contesting.com
> Administrative requests: amps-REQUEST@contesting.com
> Problems: owner-amps@contesting.com
> Search: http://www.contesting.com/km9p/search.htm
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|