Amps
[Top] [All Lists]

Re: [Amps] 50 Ohm Loads

To: "amps@contesting.com" <amps@contesting.com>
Subject: Re: [Amps] 50 Ohm Loads
From: "Jim Brown" <jim@audiosystemsgroup.com>
Date: Mon, 12 Nov 2007 15:21:32 -0800
List-post: <mailto:amps@contesting.com>
On Mon, 12 Nov 2007 15:46:07 -0500, jeremy-ca wrote:

>I just measured three 50 Ohm wirewound resistors. The flat 25W Clarostat 
>is110 uh, a flat 95W Dale is 280 uh and the 200W round Ohmite is 880 uh.

How did you measure those values? At what frequency?  What was the 
resistance at the frequency of the measurement?  

These are important questions, because that coil that we're calling a 
resistor has L, R, and C. In other words, it is not quite as simple as we 
would like it to be. :)  

73,

Jim 


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>