Actually, Formula 409 was specifically recommended to me by a very long-time
employee of ITT-Jennings in their product testing department. This is what
she uses everyday in Jennings' testing area. Pure acetone will not solvate
most ionic residues, but IPA or high proof ethanol should work well for
organic and ionic residues. Also, use of acetone may remove manufacturer's
device labeling.
Cheers, Paul WN7T
_____
From: Japerlick@aol.com [mailto:Japerlick@aol.com]
Sent: Monday, February 14, 2005 10:31 AM
To: zborg@comcast.net; amps@contesting.com
Subject: Re: [Amps] RE: 8877 Test
In a message dated 2/14/2005 11:15:21 AM Central Standard Time,
zborg@comcast.net writes:
ALWAYS ALWAYS ALWAYS clean the ceramic insulator with a degreaser product
like Formula 409 BEFORE conducting
Actually, a good solvent, acetone, or even a strong alcohol cleaning
solution is the best....no residue is the goal.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|