>I am considering using 2 different high voltages for an amp (low
>cw-2800vdc and high ssb-3500 vdc)
>
> Before I get too involved, what is a reasonable voltage tolerance for
>a pi network
>tank circuit? Like 10% or 300 volts.
As long as the E/I ratio is constant, it will work as intended. For
example, at half the voltage, use half the current. At double the
voltage, double the current. The Q should be 10 - 15.
>
cheers, Lynn
- R. L. Measures, a.k.a. Rich..., 805.386.3734,AG6K,
www.vcnet.com/measures.
end
|