Amps
[Top] [All Lists]

[AMPS] Eimac tubes

To: <amps@contesting.com>
Subject: [AMPS] Eimac tubes
From: w2cqm@juno.com (Ronald Lumachi)
Date: Mon, 13 Aug 2001 21:19:47 -0400
SELL: matched pair of full output, low profile Eimac 3-500's. Tested at
1100Watts output. These "shorty" tubes are ideal to replace the 3-400's
in the early design, minimum clearance Swans, Henrys, and Drakes L4's. 
$240+ shipping/insurance 

SELL: Reduced output Eimac 8877 tested at 1000 watts OUTPUT or about 70%
efficiency. 1983 date code!  Clean, no dents or discoloration.Other than
lowered emmision, grid and idle current are normal. Shipped in original,
foam padded  carton, Includes a Johnson porcelain air system socket, 
with  integral grid to ground tabs, a heavy wall teflon chimney, and a
choice of either a 6m or a 10-160m HV plate choke on a  threaded,
porcelain form. $225 + shipping

WANTED: a 1/2 to 1 second fixed or adjustable time delay relay with a
115VAC control voltage. Can use either the descrete delay unit or an 
integrated unit with the built in delay and contactor. 

Ron W2CQM/3 

--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>
  • [AMPS] Eimac tubes, Ronald Lumachi <=