>
>If you can adjust driving power to obtain the desired out, the CW
>position becomes basically meaningless, expecially if considering that
>tubes work better at 3Kv plate voltage.
CW has c. 2x the duty-cycle of SSB. The SB-220's HV transformer is too
light for CW on the SSB tap. The same thing is true for the TL-922.
ciao, Mauri.
- Rich..., 805.386.3734, www.vcnet.com/measures.
end
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|