>
>looking at my tl922 manual for tune up in the ssb mode has really lost
>something in the translation. can anyone with a tl922 offer a little
>help.
>according to the manual tune for max output in cw mode back drive
>off to minimum , select ssb increase drive tune for max power output
>then back off drive.
bananas
>does this mean slightly increase exciter drive and
>tune for max at this setting or does it mean tune amp at full exciter
>power then back off. really confusing because the next paragraph warns
>to never apply full cw drive power to the amp in the ssb mode.
The 922 hv supply is not designed for AØ on the SSB position. Use the
CW position for locked key (AØ) tuneup. Tune/Load for max. out with max
drive applied. Reducing drive creates an error in RL and produces a
mistune.
cheers, Ken
- Rich..., 805.386.3734, www.vcnet.com/measures.
end
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|