>
>[This is a one-time announcement.]
>
>
>The Triode Board is a new solution to the control and protection of
>triode power amplifiers. It follows the same successful formula as
>G3SEK's Tetrode Boards: all the necessary control, protection and
>metering circuits on a ready-made PC board, along with a comprehensive
>User Manual and on-line support.
>
>The Triode Board is configurable to use with almost any amateur-size
>grounded-grid amplifier, and has been tested on a wide range of triodes.
>More details on the web site!
>
>The kit includes a double-sided PC board with printed component
>locations, all the components for the PC board and the 38-page User
>Manual. Experienced constructors can buy the bare board and the User
>Manual, which includes a complete parts list.
>
>For details of the Triode Board and Tetrode Boards, visit
>http://www.ifwtech.demon.co.uk/g3sek
? In order to protect an 8877 grid from gold sputtering during an
intermittent UHF oscillation condition, the grid trip circuit should
probably be capable of interrupting 40 amperes. Can the Triode Board do
this, Ian?
>
>Triode Boards are available NOW from G3SEK.
>
>In the USA, Triode Boards and kits will be available in mid-October
>from Down East Microwave, Inc at (908) 996-3584.
>
>73 from Ian G3SEK Editor, 'The VHF/UHF DX Book'
> 'In Practice' columnist for RadCom (RSGB)
> http://www.ifwtech.demon.co.uk/g3sek
>
>--
>FAQ on WWW: http://www.contesting.com/ampsfaq.html
>Submissions: amps@contesting.com
>Administrative requests: amps-REQUEST@contesting.com
>Problems: owner-amps@contesting.com
>Search: http://www.contesting.com/km9p/search.htm
>
- Rich..., 805.386.3734, www.vcnet.com/measures.
--
FAQ on WWW: http://www.contesting.com/ampsfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|