Hello Roger,
I have some fairly heavy fabric covered Litz wire, but stripping the
enamel is proving a nightmare. It's old, pre 1960's i think, and a
solder pot doesn't do the trick. Nitromors paint stripper works, but
takes hours if not days, and you have to tease the paint stripper
through all the strands to clean them. Doing loads of ends would be a
daunting task. I acquired it from an acquaintance who got similarly
fed up with trying to tin it and let me have a go. I got a little
further but it was still a fool's errand messing with it. A shame as
it would probably be ideal for this... Thanks for the tip!
On Tuesday, May 16, 2017, you wrote:
> If you can find it, you're better off using Litz wire.
> 73, Roger
--
Best regards,
Chris mailto:chris@chriswilson.tv
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|