| *********** Capacitors ********************
Cardwell -- XR-1000HS (about 950pF max measured)  These have slightly contoured 
plates for improved tuning resolution at minimum C.  .030 air gap.  About 4.5" 
x 4" x 3.5" overall including plate travel.   Used, Good condition.   $20 ea. 
National Type TMC-300,   300pF variable capacitor,  .070" air gap, approx. 8" X 
4" x 2.5" with plates closed.  Nice n' shiny like new! $40
OAK 22641, Four Section capacitor, 20-550 pF (measured) per section large 
receiving style capacitor. .010 air gap.   6½" x 3½" x 3" overall.   ¼" 
diameter shaft.  Counter-Clockwise rotation for capacity increase.   NOS   $30
Sprague 3600pF @ 30KV Doorknob capacitor.  Red epoxy encased style -- $25
Centralab 857-25Z Ceramic 25pF NPO 15,000 volts. NIB $20.
More Capacitors may be seen at:
http://qsl.net/wc6w/wc6wfsw/index.html?fr34.html
************** Tube Sockets & Accessories *****************
Coaxial Planar Tube -- shielded heater/cathode contact assembly. Fits 2C39, 
3CX100A5 or similar.  Silver plated, NOS  -- $10 each 
Johnson 122-101 ceramic 7 pin septar socket (accepts 826, 832, 4D32, PL6549, 
PL6569, etc). These were likely a special order as they have the standard 
ground shield but, no ground clips.   NOS though, a bit dusty & tarnished from 
long storage -- $10ea
Johnson 122-237 ceramic 7 pin giant socket for 813, etc. NOS, $15
Johnson 122-237 ceramic 7 pin giant socket for 813, etc. Used, $10
Johnson 122-247A or 122-248 ceramic 7 pin septar socket (accepts 7094, 8877, 
832A, etc.) Used, $10
Millen 36001 or National SPP-9 -- 9/16" Ceramic Plate Caps (fit 813 or similar) 
Used.  Your choice, $3 ea 
More sockets and some tubes may be seen at:
http://qsl.net/wc6w/wc6wfsw/index.html?fr41.html
*********** Transformers *********************
Stancor Transformers
  FH-210 115/230V Primary 50/60 Hz -- 2.5 VCT@10A Secondary, sealed square 
metal case, used -- $15
  F-106 115/230V Primary 50/60 Hz -- 10 VCT @ 6.5A Secondary, S case Used $20
  F-610 115/230V Primary 50/60 Hz -- 6.3 VCT @ 10A Secondary, S case Used $20
Triad Transformers -- 115V 60CPS Primary
   F21A 6.3VCT @ 10A Secondary, Used -- $20
   F28U 6.3/7.5 VCT @ 25A Secondary, NOS -- $40 
More Transformers may be seen at:
http://qsl.net/wc6w/wc6wfsw/index.html?fr36.html
********** Connectors -- All NOS , US manufacture ******************
Amphenol MHV connectors -- Two 28100 right angle cable males & two 27025 panel 
mount females. -- $40 all.
UG-932 A/U MHV Male Cable connectors -- $10 ea 
UG-961 A/U MHV Female Panel connector -- $12 
UG-560/U HN Female panel mount connector -- $15 ea
UG-30C/U N Female-Female Bulkhead Connector -- $10 ea
More connectors may be seen at:
http://qsl.net/wc6w/wc6wfsw/index.html?fr44.html
***********  Miscellaneous *************
1N2804A -- 6.8V 50 Watt Zener Diodes, TO-3 case,  NOS -- $10 each
More Semiconductors may be seen at:
http://qsl.net/wc6w/wc6wfsw/index.html?fr20.html
AC-DC Electronics model RS5N30-1.   5V @ 30A switching power supply with remote 
sense terminals, screwdriver voltage adjust, 6" x 2.5" x 10".  Employed with an 
external soft-start (See--  http://qsl.net/wc6w/wc6wamps/index.html?fr63.html ) 
these can power the heater(s) on a 3CX1000 or a pair of 3-400Z's, 3-500Z's, 
4-400A's, etc.  Used -- $30 ea.   (3 units available) 
More Power Supplies may be seen at:
http://qsl.net/wc6w/wc6wfsw/index.html?fr15.html
Synchro Transmitters -- IMC Magnetics, Model 008-216, 26V 400Hz, .75" diameter 
housing, .120" dia. shaft, flying leads.   These will drive a typical Radio 
Compass Indicator.   NOS.   $20 ea. 
Water cooled heatsinks -- 12" x 8" used, drilled for a flock of TO-3's plus a 
few diodes. Back is flat. 3/8" water lines. $50 pair
ILG Electric Ventilation -- 17-18-022A squirrel cage type fan. Encased motor 
with 181-009-EA fan 115/230 VAC 1.6A/.8A 50/60Hz 3000 RPM 4+" round intake, 3+" 
x 4-3/4" rectangular output flange, weighs 25 lbs.  Removed from a RCA 
transmitter that employed a 4CX5000A.   Used -- $45 
Commercially made airflow switch assembly consisting of a V4-16 Microswitch 
(250VAC 5A contact rating) with a 1-3/8" x 1-3/4" sheet metal vane soldered to 
the switch arm. The switch is mounted in a U shaped anodized aluminum frame 
about 2.5" deep with mounting ears. Marked S-101 and part no. 467-115 if anyone 
knows where that's from! NOS $10 
More mechanical items may be seen at:
http://qsl.net/wc6w/wc6wfsw/index.html?fr46.html
***************************************
And of course some meters, panel meters, time meters & RF ammeters, please see:
http://qsl.net/wc6w/wc6wfsw/index.html?fr32.html
**********************************
73 & Good afternoon,
   Marv WC6W
http://qsl.net/wc6w/
*
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
 |