[AMPS] apology

[kh7m@hsa-kauai.net (Jim Reid)]

> >Now Rich - post something controversial so
> >we can back to the bickering and gnashing of teeth.
> >
> So when are amplifier manufacturers going to get off of their lazy butts 
> and start building amplifiers. with a filament adj. rheostat and a means 
> of measuring filament potential?

The following may be stimulating --- my Henry Ultra metering
does read the filament voltage.  But,  so far as I know,  there
is no rheostat in sight to adjust same.  This Henry uses
the 3CX3000 tube,  so loafs along very nicely at 1.5kW
on either CW or SSB.  Enjoy it a bunch!!  You can just
see the Henry Control unit at the left in the photo of
my operating position at:

    http://www.qrz.com/callsign.html?callsign=KH7M

Boxes with all the pots on top of the Controller are
the various tune/load presets.

73,  Jim,  KH7M



--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm