| To: | <amps@contesting.com> |
|---|---|
| Subject: | [AMPS] leakage current of electrolytics |
| From: | zeitler@ibm.net (zeitler@ibm.net) |
| Date: | Sun, 23 May 1999 21:39:27 -0700 |
What is the acceptable limit for leakage current on electrolytic capacitors? The units in use are 560uF 400 volt and 470uF 450 volt. I am measuring around 2 to 300 hundred micramps at the max voltage depending on the one being tested and need to know if this is in the safe zone. Lane Zeitler ku7i -- FAQ on WWW: http://www.contesting.com/ampfaq.html Submissions: amps@contesting.com Administrative requests: amps-REQUEST@contesting.com Problems: owner-amps@contesting.com Search: http://www.contesting.com/km9p/search.htm |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [AMPS] 'Glassmike' for blocking cap, Rich Measures |
|---|---|
| Next by Date: | [AMPS] leakage current of electrolytics, Peter Chadwick |
| Previous by Thread: | [AMPS] 'Glassmike' for blocking cap, Vic Rosenthal |
| Next by Thread: | [AMPS] leakage current of electrolytics, Phil (VA3UX) |
| Indexes: | [Date] [Thread] [Top] [All Lists] |