Geeeeez, Tom, Don't ever put an allen wrench in a coil...those slugs crack
real easy. What you want is called a "tuning wand". I think you can get a
set from Radio Shack...if not google the name. Everybody carries them.
However, if you are just changing tubes, the input should not normally need
to be retuned.
As for the coil, I can't help with that, some one else in here will know.
James KB4RMN
----- Original Message -----
From: "Tom Osborne" <w7why@verizon.net>
To: <Amps@contesting.com>
Sent: Sunday, March 18, 2007 8:42 PM
Subject: [Amps] SWR tuning
> Hi All
>
> I am getting a new set of tubes for my SB-200. I assume that after I put
> them in, I will have to retune the input. Where can I find a
> non-conductive
> allen wrench to adjust the slugs in the coils? I notice that when I stick
> the metal allen wrench inside the coil, it changes the SWR without even
> adjusting anything.
>
> Also, where can I purchase a new 80 meter coil and cap for the input
> tuning?
> Thanks and 730
>
> Tom W7WHY
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|